HTPC Systems

  

  

  

  

  

 Set Top PC's

  

  

  

 NAS Systems

  

  

 Storage Systems

  

  

  

 Gaming Systems

  

 Accesories

  

  

     

  

  

  

  

  

  

  

  

  

 Cooling

  

  

  

  

 Power

  

  

  

 HDTV Reception

  

  

  

  

  

  

 General Info

  

  

  

 Shopping Cart

  

 

Detailed Information - Case Order Form - Complete Systems


 Mass Storage NAS4x - Case Order Form

Each case includes:
  • Fully assembled aluminum heatsink case
  • Drive module plates for four hard drives with mounting screws and isolation pads
  • Power button and status LED
  • Mounting for mini-ITX motherboard
  • One of several rear panel options
  • Four low-profile rubber feet
  • Hex driver for fast drive assembly

Faceplate Color

Anodizing samples in clear and black

Aluminum case and all aluminum brackets are treated by a anodizing process for corrosion protection and a long lasting uniform finish. The rear chassis and internal  parts have a black finish, the faceplate can be either black or silver.
Black faceplate
Silver faceplate
Laser Etched Logo Graphics  
Faceplate is laser etched with custom graphics and lettering during the anodizing process. Graphics can include company logo, button labels, system specs, and warning labels. Artwork to be provided by customer. Artwork should be in a vector format for best results.  Approximate pricing:
  • Clear lettering on black case ($175)
  • Colored lettering on silver or black case ($200)

Contact A-Tech for price quote. Normally you can run several faceplates for the same minimum charge or a small nominal fee per plate. Different types of cases can be combined on order to reduce total cost.

 
No Logo
With custom laser etched logo graphics

Rack Mount

2U Rack Mount Faceplate

(1U case shown)

The one-piece rack mount faceplate incorporates rack mounting into the faceplate for a seamless look. The overall width of faceplate is 19". Oval mounting holes are centered at 18.312". Faceplate height is 3.50" (2U).
No rack mounting
With one-piece rack mount faceplate - add $85
Power LED
Case can be configured with a basic green power LED or a blue LED for a different look.
With Green LED
With Blue LED - add $5
Machined Billet Aluminum Case Feet
Enhance the appearance of your case with these machined billet aluminum case feet.

 

With Standard Rubber feet

With Black Aluminum Case Feet - add $25
With Silver Aluminum Case Feet - add $25

HeatSync Cooling System
With the HeatSync Cooling system installed, heat from the processor is transferred into the heatsink case for dissipation to the outside air.

Includes:

  • HeatSync base for processor
  • Pre-bent and fitted heat pipes
  • Aluminum clamping plates for heatsink case
  • Required installation hardware

 

No HeatSync Cooling System

Intel DQ77KB (35w CPU max.) - add $120 <--NEW!

SuperMicro X7SPA-H - add $100

VIA EPIA SN1800G motherboard- add $110

Shipping and Ordering Information

When will the case ship?  

These cases are normally in stock and will ship with in 2-3 weeks depending on other options and color choice.

 

Quantity Discounts?

Discounts are available on orders of five or more cases. Contact A-Tech Fabrication for more information.

 

Mass-Storage NAS4x Case ... $549 + options

Please select options above before adding to cart. Before checking out, be sure to add any additional accessories below so that they can be shipped with your case.

 

 

Mass Storage NAS4x Case Accessories

120 Watt DC-DC Power Supply

120 Watt DC-DC Power Supply

 

The picoPSU-120 is the smallest snap-in 12V ATX dc-dc power supply. Plugs directly into a 20-pin ATX MB connector. 120 watts maximum output. 95% efficiency. To operate, an external AC power adapter is required, see below.
  • 12 volts input
  • 120 watts output
  • 7A @ 12V
  • 6A @ 3.3V
  • 6A @ 5V

$49.95 each

12 Volt AC Power Adapter

External AC power adapter for use with the Mass Storage case.
  • 100 to 240 VAC input
  • 12 Volts Output
  • 8.5 Amps
  • 5mm x 2.5mm Connector

$44.50 each

Serial ATA Power Adapter Cable

Adapts 5.25" IDE power cable to dual SATA HDD power connectors. Use this cable to power two SATA drives. Two SATA power adapters cables are required in the NAS4x Case to run four drives.

 

$4.50 each

 

IDE Power Cable Splitter

Single IDE power cable to dual IDE power cable splitter. One IDE splitters is required in the NAS4x Case to run four drives.

 

$3.00 each

 

 

 

  


Copyright 2001-2013  A-Tech Fabrication Company.  All rights reserved.