Detailed Information - Case Order Form - Complete Systems

HeatSync Three-Sixty - Complete System
A-Tech Fabrication is a leader in designing state-of-the-art computer systems for the home theater. Now you can purchase a complete system assembled and tested by the experienced team at A-Tech Fabrication and know you are getting the best. Each Xbox console is stress tested continuously for 48 hours before disassembly to ensure the system is functioning properly with no defects. The console is then carefully disassembled and reassembled into the HeatSync Three-Sixty case. All components are checked and fitted to our specifications for reliability. The completed system is then stress-tested again for 24 hours to ensure all components are functioning properly and operating within normal thermal specifications.

Standard Features:

  • Heavy-duty chassis with Modular heatsink system

  • HeatSync® CPU cooling system

  • HeatSync® GPU video cooling system

  • Machined billet aluminum power, reset, and eject buttons

  • Infrared receiver and Wireless controller port

  • Thermally controlled exhaust fan -normally OFF

  • Green power and controller status LED's

  • Standard black anodized aluminum finish on chassis

  • Dimensions - 17.50" wide x 9.25" deep x 3.25" high (+ 0.31" with feet)

Optional Features:

  • 19" 2U one-piece rack mount faceplate

  • Memory card ports

  • Accessory ports

  • Billet aluminum case feet

Note: Also available as a just the bare case, see Case Order Form for details.

HeatSync Three-Sixty - Complete System Order Form 

Rack Mount

Rack Mount Faceplate

 
The one-piece rack mount faceplate incorporates rack mounting into the faceplate for a seamless look. The overall width of the faceplate is 19". Oval mounting holes are centered at 18.312". Faceplate height is 3.50" (2U).
No rack mounting
With one-piece rack mount faceplate - add $75
Machined Billet Aluminum Case Feet

Billet Aluminum Case Feet

 
Enhance the appearance of your case with these beautifully machined billet aluminum case feet.

 

 

With Standard Rubber feet

With Black Aluminum Case Feet - add $25
With Silver Aluminum Case Feet - add $25
Memory Card Ports

Memory Card Ports

 
Faceplate is machined with cutouts for two memory card ports. The memory card ports are not required with the new Xbox 360 since all games and player information is stored on the hard drive. For system upgrades, the faceplate can also be removed to access the ports if required.

No Memory Card Ports
With Memory Card Ports add $20
Accessory Ports

Accessory Ports

 
Faceplate is machined with cutouts for accessory ports used for wired game controllers and other add-on devices. These are not needed if you use the standard wireless game controller included with the Xbox 360.

No Accessory Ports
With Accessory Ports - add $15

Shipping and Ordering Information

Warranty:

Once the seal has been broken on the Xbox console, the warranty is voided from Microsoft. We cannot return the console to Microsoft any more than you could return it if you performed the installation yourself. A-Tech Fabrication will perform the labor to replace the Xbox console system board at no cost for one year after purchase. Since we cannot return a defective product to Microsoft under their warranty, the customer will only pay for the replacement cost of the console at current market price. A-Tech Fabrication will perform the labor for free during the first one year. After one year, should the system board fail or you want to upgrade, A-Tech Fabrication can install a new board for a nominal fee.

 

When will the case ship?  

Standard lead time is 2-3 weeks.

 

HeatSync Three-Sixty - Complete System ... $1299

 

 
 

 

  

Home

HTPC Cases

Accessories

Antennas

 Support

Contact

 Checkout

Copyright © 2001-2010  A-Tech Fabrication Company.  All rights reserved.