HTPC Systems

  

  

  

  

  

 
  

  

  

 Storage Systems

  

  

  

 Set Top PC's

  

  

  

 Gaming Systems

  

 Accesories

  

  

     

  

  

  

  

  

  

  

  

  

 Cooling

  

  

  

  

 Power

  

  

  

 HDTV Reception

  

  

  

  

  

  

 General Info

  

  

  

 Shopping Cart

  

Coaxial Cable

Shown above is RG-11 top, RG-6 bottom

 

For matched coax cables see: Phasing Harnesses for Stacked Antenna Arrays

RG-11/U Broadband Coax Cable

  • Lowest loss cable available, excellent for long runs between antenna and OTA receiver
  • 3.50 dB attenuation per 100' at 750 MHz
  • 14 AWG Bare Copper Covered Steel Conductor
  • Foam PE - Gas Injected Foam Polyethylene insulation
  • Quad Shield - 100% Foil - 60% Braid - 100% Foil - 40% Braid
  • PVC - Polyvinyl Chloride jacket (black)
  • Structural Return Loss: 5 MHz - 1 GHz, 20 dB min.
  • Belden 1617A Specifications

CC-11Q

RG-11/U Broadband Coax Cable, cut to length, price per foot

N/A  

CA-11Q

Cable assembled with (2) Snap-N-Seal® Type "F" Male Cable Connectors, add to price of cable

N/A  

FC-11

Snap-N-Seal® Type "F" Male Cable Connector

Fits RG-11 quad shield cable

N/A  

RG-6/U Precision Analog/Digital Video Cable

  • Extra-low loss RG-6 cable, use for antenna phasing harness and interconnect cables between video equipment
  • Precision video cables are used in critical analog video circuits and high quality applications such as live broadcast in network studios and pre- or post-production facilities. They should be used anywhere superior signal integrity is required.
  • 5.00 dB attenuation per 100' at 750 MHz
  • 18 AWG Bare Copper Conductor
  • Foam PE - Gas Injected Foam High Density Polyethylene insulation
  • Dual Shield -  100% Foil - 95% Tinned Copper Braid
  • PVC - Polyvinyl Chloride jacket (black)
  • Structural Return Loss: 5 MHz - 3 GHz, 21-23 dB min.
  • Belden 1694A Specifications

CC-6PV

RG-6/U Precision Video Cable, cut to length, price per foot

$0.75

CA-6PV

Cable assembled with (2) Snap-N-Seal® Type "F" Male Cable Connectors, add to price of cable

$17

CA-6PV-B

Cable assembled with (1) Snap-N-Seal® Type "F" Male Cable Connector and the other end prepped to connect to a PCB balun. Use this cable to hook up a single Blake antenna to mast mounted amp. Coax cable is 6 feet long.

$20


FC-6

Snap-N-Seal® Type "F" Male Cable Connector

Fits RG-6 standard cable

$0.95

 

  


Copyright © 2001-2016  A-Tech Fabrication Company. All rights reserved.