Specialty HTPC Products
  • 2.5" HDD Adapters
  • Thermal Fan Switch
  • Fan Speed Controller
  • Black Anodized PCI Slot Covers
  • USB to MB Header Adapter
Power Supply Products
  • 2U Power Supply
  • External Power Supplies
  • DC-DC Converters
  • AC Power Adapters
  • PS Adapter Kits
Cooling Fan Products
  • Silent Case Fans
  • Fan Block Off Plates
  • Fan Adapter Plates
  • Fan Grills
  • Mounting Screws
Data Cable Products
  • Multi-Lane Adapter Plate
  • Multi-Lane Cable
  • Slim-line Drive Adapter
  • IDE Drive Cables
  • Serial ATA Drive Cables
Power Cable Products
  • IDE Power Extension Cables
  • Floppy Power Extension Cables
  • SATA Power Extension Cables
  • IDE/SATA Adapter Cables
  • Slim-Line IDE/Power Adapter
Fan Cable Products
  • Fan Speed Controller
  • Thermal Fan Switch
  • Fan Speed Cables
  • Fan Extension Cables
  • Fan Splitter Cable

Specialty HTPC Products

2.5" HDD to PCI Bracket Kit  
This drive bracket kit allows you to install one 2.5" HDD into a free PCI slot. Works with any computer case.
$15.00
2.5" HDD to Dual PCI Bracket Kit  
This drive bracket kit allows you to install up to three 2.5" HDD's into two free PCI slots. Works with any computer case.
$20.00
2.5" HDD to IDE Bracket Kit  
This drive bracket kit allows you to install up to two 2.5" HDD's into the space of a 3.5" IDE drive. Thick aluminum plates absorb and dissipate heat. Works with any computer case.
$15.00
Adjustable Temperature Switch

Adjustable Temperature Switch

This adjustable temperature switch allows you to fine tune the activation temperature for use in many applications. The switch reacts only to thermal affects and requires no electricity to operate. The multi-turn potentiometer provides a wide adjustment range. Made from corrosion resident 304 stainless steel to withstand harsh environments. High temperature lead wire is 8" long. Includes two mounting clamps.
  • Range: -100 to 600 F (-73 to 316 C)
  • Sensitivity: As low as 1° F
  • 5 Amp @ 120 VAC
  • 3 Amp @ 240 VAC
  • 1 Amp @ 120 VDC
$75.00
Automatic Fan Speed Controller

Automatic Fan Speed Controller

This Fan Speed Controller is compact in size for easy mounting in any location. Linear response curve for smooth ramp up. Load stabilized output for consistent speed. 12 volt start-up circuit spins fan at full speed during start up to ensure reliable operation. One controller can be used with two case fans using a fan splitter cable. Most motherboards can handle the current of two small fans per connector. Typical speed range is around 1700---2500 RPM. If you want to constantly run your fan at a precise RPM- get the  fan speed cable instead.
$15.00
Thermal Switch  

Thermal Switch

This switch reacts only to thermal affects and requires no electricity to operate. Normally open switch closes at rated temperature sending power to fan. Can be used in conjunction with fan speed controllers for maximum versatility. Swivel bracket allows switch to be mounted to any flat surface.
  • Normally open circuit
  • Switch closes at rated temperature
  • Max load 8.5A @ 12 VDC
  • Voltage Rating 250 VAC

 40 C. Degree Thermal Switch .... $15.00

Resets (opens circuit) at 32C

50 C. Degree Thermal Switch .... $15.00

Resets (opens circuit) at 39C

Temperature Switch Kit  

Temperature Switch Kit

Use this kit in the HeatSync 6000 Case for silent fan operation. Allows case fan to remain off when system is in low demand. After system has been under load, switch turns the fan on after case temperature reaches 40 deg C. Includes bracket for mounting switch to heatpipe clamping plates on case. This switch requires no electricity to operate increasing reliability. Can be used in conjunction with fan speed controllers for maximum versatility.
  • 40 deg C. Temperature Switch
  • Switch Harness for fan
  • Bracket for HeatSync 6000 case
  • Mounting Hardware

$35.00

Black Anodized Aluminum Slot Covers  
These custom made black aluminum slot covers will dress up your HTPC case. Blends in perfectly with our black cases. Each cover is precision laser-cut, formed, and anodized.
$7.50 set of four (4)
USB to MB Header Adapter  
This adapter allows you to connect internal USB devices (VFD, IR, PowerMate, Touch-Screen) directly to a USB header on the motherboard. Eliminates the need to route these cables externally. Each adapter has two ports.
$15.00 each

External Power Supply ATX Adapter Kit

 

Use an external power supply with the Mass-Storage 8X Case. This kit replaces the ATX PS with a small cool running DC-DC power converter and 80mm exhaust fan.

 

 

Detailed Information

Multi-Lane Adapter and Power Supply Kit

 

A new rear panel is now available for all owners of previous versions of the Mass-Storage 4x case. This panel allows a single Multi-Lane data cable to be used for simpler connections up to six feet long. Another optional feature with this panel is the internal DC-DC power supply so that the case can be plugged into power away from the host PC.

 

Detailed Information

Mass-Air-GPU Heatsink System
  • Silent, high performance heatsink system
  • Works with ATI Radeon video cards
  • High flow heatsink with copper heat spreader
  • Formed aluminum high flow air duct
  • Two mounting screws with preload springs

More Details

$55.00

Select Model:
ATI Radeon 9500 Pro, 9700 Pro, 9800 Pro
ATI Radeon AIW 9700 Pro and AIW 9800 Pro
ATI Radeon 9500, 9700, or 9800 with Mike Parker Mod (MP-1)

 

 

Home

HTPC Cases

Accessories

Antennas

Support

Contact

Checkout

Copyright © 2008  A-Tech Fabrication Company.  All rights reserved.