The picoPSU-120 is the smallest snap-in 12V ATX dc-dc
power supply. Plugs directly into a 20-pin ATX MB connector. 120 watts
maximum output. 95% efficiency. To operate, an external AC power adapter is required,
see below.
12 volts input
120 watts output
7A @ 12V
6A @ 3.3V
6A @ 5V
$49.95 each
12 Volt AC Power Adapter
12 Volt AC Power Adapter
External AC power adapter for use with the Mass
Storage case.
100 to 240 VAC input
12 Volts Output
8.5 Amps
5mm x 2.5mm Connector
$44.50 each
Single SAS to SATA Centronics adapter
SAS SFF-8088 adapter with four SATA HDD connectors on
a Centronics type slot bracket. Use this adapter in our storage
cases for connecting to four SATA HDD's. One Mini-SAS cable is
required for connecting to a 4-port RAID card with an external back
panel SFF-8088 connector.
Eight 7-pin Serial ATA2 Connectors
One SFF-8088 External SAS Connectors
$52.50 each
Dual SAS to SATA Centronics adapter
SAS adapter with eight SATA HDD connectors on a
Centronics type slot bracket. Use this adapter in our storage cases
for connecting to eight SATA HDD's. Two Mini-SAS cables are required
for connecting to a 8-port RAID card with two external back panel
SFF-8088 connectors
Eight 7-pin Serial ATA2 Connectors
Two SFF-8088 External SAS Connectors
$106.95 each
Mini-SAS SFF-8088 Cable
Mini-SAS cable is used to connect our storage cases to
your host PC. Each end has a SFF-8088 connector. Use for connecting
RAID card to the SFF-8088 SATA adapter above. Choose from 1-meter or
2-meter, we also have 4-meter and 8-meter cables available special
order.
One (1) meter long $56
Two (2) meter long $82
Serial ATA Power Adapter Cable
Adapts 5.25" IDE power
cable to dual SATA HDD power connectors. Use this cable to power two SATA
drives. Two adapters cables are required to run
four drives.
$4.50 each
IDE Power Cable Splitter
Single IDE power cable to dual IDE power cable
splitter. One IDE splitter is required to run four drives.