Dual Antenna Boom for Horizontal Stacking
Use our Dual Antenna Boom to increase reception strength and reduce multipath interference when horizontal stacking. This boom made is from light-weight, non-conductive fiberglass tube and can be used with all popular Yagi style antennas; including Blake, Televes, Channel Master, Winegard, Radio Shack and others. The antenna spacing is easily adjusted with the two clamping boom brackets. Fits up to 1-1/8 inch antenna and 1-3/8 inch mast.
- 1ea - 1-1/4 inch diameter x 48 inch long fiberglass tube
- 1ea - Machined aluminum Center Boom Bracket with doubler sleeve
- 2ea - Machined aluminum Adjustable Antenna to Boom Brackets
- 1ea - All required U-bolts and hardware
Dual Antenna Boom Tube Assembly
$175 each
Center Boom Bracket
This Center Bracket mounts to your mast and holds our horizontal boom tubes. Precision machined from 1/4" thick 6061-T6 aluminum plate. Fits 1-1/4 inch boom tube and up to 1-3/8 inch mast. Includes a machined aluminum doubler sleeve to protect the 1-1/4 inch fiberglass boom tube.
Center Boom Bracket
$50 each
Tilting Bracket for single Yagi antennas
Use this bracket to tilt a single antenna up to 20 degrees. Works with most all Yagi style antennas. Machined from 1/4" thick 6061-T6 aluminum plate for less flex and vibration. Fits up to 1-1/8 inch antenna and 1-3/8 inch mast.
Tilting Bracket, 1-1/8" antenna, 1-3/8" mast
$40 each
Tilting Bracket for 2.5 inch mast
Large 2.5 inch mast size for commercial applications. Use this bracket to tilt a single antenna up to 20 degrees. Works with most all Yagi style antennas. Machined from 1/4" thick 6061-T6 aluminum plate for less flex and vibration. Fits up to 1-1/4 inch antenna and 2-1/2 inch mast.
Tilting Bracket, 1-1/4" antenna, 2-1/2" mast
$45 each
Adjustable Antenna to Boom Bracket
Attaches your antenna to our boom tube. The machined aluminum doubler sleeve allows antenna position to be easily adjusted along the length of boom tube. Sleeve fits our 1-1/4 inch Boom Tube (can be used with up to 1.375 tube without sleeve). Works with most all Yagi style antennas, the antenna size can vary up to 1.125 inch round or square. Machined from 6061-T6 aluminum plate. Includes (4) U-bolts and machined aluminum sleeve.
Adjustable Antenna to Boom Bracket
$45 each
Fiberglass Boom Tube
Use this tube with our Center Bracket and Adjustable Antenna to Boom Brackets. Made from light-weight, non-conductive fiberglass to isolate the ground from each antenna. The tube is 1-1/4 inch in diameter and 48" long. Picture above shows fiberglass tube installed in our Center Boom Bracket.
Fiberglass Boom Tube
$45 each
Antenna Testing Information
We have conducted these reception tests in the past, use this information to help guide you to the right antenna choice.
FAQ's
General information to help solve reception problems.